SOLVED-The viifbr0 is not started. Please run service virtnetwork start- Virtualizor

0

You  might get this error  message  –The viifbr0 is not started. Please run service virtnetwork start after installing  Virtualizor on your server and  your network interface is not eth0 if your network interface is not eth0  when you enter  the command service virtnetwork start on  ssh you will get Error: No ip address found.

Admin Panel 2015-10-17 12-40-48-2

Solution

step1

locate yor network interface by running this command

cd /etc/sysconfig/network-scripts/ ;ls

 

it will normall be  either one of the following

ifcfg-etho

ifcfg-eth1

etc
step 2

if you are using Network Interface other then the eth0 then go to Virtualizor panel  in Configuration > Master Settings and change it to the one you have(see image)

Configuration 2015-10-16 20-49-48

Step3

run “service virtnetwork restart

SOLVED-The viifbr0 is not started. Please run service virtnetwork start- Virtualizor

Share.

About Author

Comments are closed.